Urethane Polymers International, Inc.
PHONE: (909) 357-7200 - TOLL FREE: (800) 560-0230


Heavy Duty, Trowel-Applied Epoxy Industrial Flooring

Scope: This specification covers the installation of a heavy-duty epoxy floor topping designed to resist chemical and mechanical abuse. M-C-POXY SYSTEM “T” is a seamless epoxy topping which consists of 100% solids, two component epoxy resin binders that are blended with quartz and silica aggregate and trowel-applied to form a ¼ inch (6.25 mn) thick flooring system. M-C-POXY SYSTEM “T” is an aesthetic, chemical resistant and high traffic resistant flooring surface which is intended for institutional, industrial and commercial use.

Work Included: Furnish and install the M-C-POXY SYSTEM “T” seamless flooring as manufactured by Urethane Polymers International, Inc. The flooring is to be installed to an average 1/4 inch thickness and shall be installed as a 1/8 inch cove base to the height specified. Apply in accordance with the architectural drawings and room finish schedules as shown and the latest instructions supplied by UPI. Include all material, labor and equipment required to complete the installation over the surfaces designated.


System Summary

M-C-POXY System "T"

Steps UPI Product Amount/100 sq.ft.
Concrete Substrate    
Primer/Sealer UI-7051 0.29 – 0.40 gal.
Base Coat and Epoxy Aggregate Mortar UI-7051 Mortar mixed and applied at 1/4-inch thickness
Grout Coat UI-7128 Epoxy Grout Coat 0.57 – 0.80 gal.
Texturing Aggregate Flint Shot Silica 15 – 20 lbs.
Topcoat UI-7128 0.66 – 1 gal.